Hook Mount Cable Tray
Fixed 15.7"
$49.90
Skip to product information
Hook Mount Cable Tray
The under-desk cable tray that clamps on instead of sticking on. No holes, no glue, nothing to fall.
- 2.98mm carbon steel
- Holds 33 lb
- Fits desks up to 2.3" thick
$49.90
- Free Worldwide Shipping
- Hassle-Free Support
- 100% Secure Payment
- 60-day Return & Refund
Description
An under-desk cable tray that clamps on instead of sticking on. Two steel arms drop over the back edge of your desk and a thumbscrew on each side closes the gap against the underside — no drill, no adhesive, nothing left behind when you take it off.
2.98mm carbon steel with a three-layer baked finish, rated to 33 lb. It carries a full power strip, two chargers and a router without flexing. The skeletonized base lets adapter heat out.
Shipping & delivery
Free shipping on every order, with no minimum.
Orders are picked and packed on business days. You get a confirmation email straight away, and a separate email with tracking once the parcel is first scanned.
The delivery estimate for your address is calculated at checkout, before you pay. If tracking ever stops moving, email us — we chase it or send a replacement, and you do not have to wait out a set number of days before asking.
Warranty & returns
60-day returns. Try it on your desk. If it does not fit your setup, send it back — no questions, no restocking fee.
2-year hardware warranty on the steel and the clamp hardware. If it bends, or the finish fails in normal use, we replace it.
Complete the Edge
0 added
Total
$49.90
Added as separate items. Remove either one in the cart.
The problem
Adhesive was never going to hold a power strip.
Most under-desk cable trays ship with a strip of double-sided tape and a promise. It works for about three weeks. Then the adhesive gives up under the weight, the tray tilts, and your power strip is back on the floor — this time with a sticky rectangle left on your desk.
The alternative has always been a drill. Which is fine, unless the desk isn't yours.
The Hook Mount
It hangs on your desk. That is the whole idea.
Two steel arms drop over the back edge of your desk and take the weight the way a coat hook takes a coat. Gravity does the work. Nothing is glued, nothing is screwed, and nothing is left behind when you take it off.
Tightens by hand.
A knurled thumbscrew on each arm closes the gap against the underside of your desk. Turn it until it stops. That is the entire installation — no drill, no screwdriver, no anchors, no template.
Holds 33 lb without flexing.
2.98mm carbon steel with a three-layer baked finish. It carries a full power strip, two chargers, a router and the brick you have been hiding behind the monitor — and does not flex doing it.
Three ways to hide a power strip
| Feature | Adhesive | Screw-in | Hook Mount |
|---|---|---|---|
| No holes in your desk | ✓ | ✗ | ✓ |
| Holds a full power strip | ✗ | ✓ | ✓ |
| Survives past week 3 | ✗ | ✓ | ✓ |
| Installs without tools | ✓ | ✗ | ✓ |
| Moves to a new desk | ✗ | ✗ | ✓ |
| Renter-safe | ~ | ✗ | ✓ |
Adhesive trays are the most common option in this category — and "it fell off" is the most common thing buyers say about them. That’s the problem the Hook Mount was built around.
Specifications
| Material | 2.98mm carbon steel, three-layer baked finish |
|---|---|
| Load capacity | 33 lb / 15 kg |
| Fits desk thickness | 0 – 2.3" / 0 – 6 cm |
| Size (Fixed) | 15.7 × 5.3 × 7.4" |
| Size (Expandable) | 15.7–29" × 5.3 × 7.4" |
| Ventilation | Skeletonized mesh base |
| Finish | Matte black |
| Mounting | Hook + thumbscrew clamp |
In the box
- Cable Tray
- Hook Mount arms
- Thumbscrews
- Install card
No tools required.
Before / after
The same desk, ninety seconds apart
Before: seven cables, one power strip on the floor. After: one cable, and a desk you can actually vacuum under.
-
60-day returns
Try it on your desk. If it doesn't fit your setup, send it back. No questions.
-
Arrives right or we fix it
If it shows up bent, scratched or missing a part, send a photo and we replace it. No return shipping on our mistakes.
-
Free shipping
On every order, every destination we serve.
Questions people actually ask
Will it fit my desk?
Any desktop up to 2.3 inches thick, which covers almost every desk sold for home use — IKEA, standing desks, solid wood, laminate. Measure the back edge where the tray will hang. If you’re over 2.3", it won’t clamp.
Not sure how to measure it? The Fit & Setup Guide walks through the three measurements to take, and it takes about three minutes.
Does it work on a desk with a back panel or a cable channel?
It needs an open back edge to hook over. If your desk has a modesty panel flush to the top, or a lip that runs the full width, the arms won’t seat.
Will it damage the finish on my desk?
The clamp pads are the only points of contact. Hand-tight is enough — you’re holding weight from below, not fighting it. If your desk has a soft or lacquered finish, a strip of felt under each pad is cheap insurance.
What actually fits inside?
A standard 6-outlet power strip plus two or three chargers, or a small router. The Expandable size takes a full 12-outlet strip.
Can I move it to another desk later?
That’s the point. Two thumbscrews off, two on. Nothing is left behind — no holes, no adhesive residue.
Fixed or Expandable — which one?
Fixed if you’re hiding a power strip and a couple of bricks. Expandable if you’ve got a router, a dock, or a wide desk you want covered end to end.
Do I need the Edge Hook too?
No. It’s a separate module that uses the same clamp, for getting a headset or a bag off the desk surface. Buy it when the desk still feels crowded.
Or do the whole desk at once
Complete the Edge
-
The Edge System
All four pieces at one price: this tray, two hooks, the pad and the ties.
$99.00
-
Edge Hook
Hangs your headset off the desk. Same clamp, same 90 seconds.
$19.90
-
Edge Hook ×2
One for the headset, one for the bag.
$29.90
-
Desk Pad
Sits flat, wipes clean.
$19.90
